SPECIFICATIONS

1.0 SCOPE - This specification describes a Bevco House as manufactured by Bevco Engineering Company, Inc., W222N5739 Miller Way, Sussex, WI 53089. 

2.0 DESCRIPTION - The house shall be completely assembled, ready to install, and capable of housing any equipment as shown on the drawings. The Bevco House shall be model PBF and shall be supplied with all components factory mounted. 

3.0 DESIGN - The house shall be a one-piece molded fiberglass, reinforced polyester (FRP) construction with minimum wall, door, and roof thickness of 1/4". Units with cemented or bolted end caps will not be accepted. All materials of construction are to be ultraviolet resistant, and the finished house, when installed in accordance with the manufacturer's instructions, shall withstand 90 mph winds and a 15 lb./sq. ft. snow load. The 36"x 6'6" door shall have corrosion resistant hardware and the door shall be provided with a 17"x 17" shatterproof window. The house shall be designated hieght and width as per order x 7' high at the peak and shall be shipped factory assembled. Included shall be removable lifting eyes and sufficient gasket and mounting flanges for direct setting on concrete slab. 

4.0 COMPONENTS - The house shall have the following components factory mounted. 

4.1 MOUNTING HARDWARE - All mounting hardware shall be made of stainless steel or other corrosion resistant metal.

Model ECS-F  |  Model 7521-F  |  Model 7521-S
Model 7523-F  |  Model 7523-S  |  Model PBF | Clamshell